154 kV Cable Assembly, Header Construction and Commissioning

154 kV Cable Installation Work

This work involves the installation of electrical cables of 154 kilovolt (kV) voltage level. Such high voltage cables are used to transmit power over long distances in electrical networks. These operations, which require special processes and experience, are carried out smoothly with our experienced staff.

Cable installation works are usually carried out on the routes of electric power transmission lines.

The basic steps of the work are as follows:

• Preparation of the cable route: The area where the cable will be laid is cleaned, necessary excavation works are carried out and infrastructure works are completed.
• Cable laying: Prefabricated and prepared cables can be laid along the route. Care is taken to prevent damage to the cable during this process.
• Grounding and protection of the cable: A grounding system is installed on the cable route and the cable is protected against physical damage.
• Making Cable Headers: Cables are made ready for commissioning with suitable headers.
• Testing and commissioning: The assembled cables are subjected to detailed tests in terms of voltage, insulation and other parameters. After the tests are successful, the cables are commissioned.

These high voltage cable installation works are carried out by our expert engineer staff in accordance with technical standards. Occupational safety measures are also meticulously applied.